Fully progressive methanol system. With fuel table-like control of methanol flow, this system is sufficient for almost all water/meth injection needs. Offering much superior control over traditional two knob "progressive" systems, this THE "missing link" of tuning. You get all the top tier features and absolutely none of the extraneous fluff.

3D table for MAP vs RPM vs Meth flow
Injector Duty Cycle follower and multiplier
Pulse fast acting valves
Pump pulse control
Failsafe on low level or low pressure switch
Independent map sensor supported
Fully progressive linear system
Data log with graphing abilities
Can pulse fuel injectors

How it works
Frostbyte taps into your map sensor and your fuel injector or tachometer signal and then converts that into live information to control fuel flow from a 3D table.

Advantages:

Frostbyte has superior flow control over regular meth systems
Less time adjusting fuel in the ECU’s main table
No dripping from nozzle
Less worry about choosing correct nozzle sizes
low level and low pressure failsafes

Kit Contents

300psi pump with EPDM seals
Allen key can be used to adjust water pump pressure
FrostByte 3D Progressive controller
15' of High Pressure Black Tubing
1x Injector (please supply engine cc & max boost + rpm so we can supply appropriate sizes).
1x Nozzle Holder
1x Check valve
filtered self sealing tank tap
All fittings needed for installation
Inline Fuse Holder with 10 amp fuse
30 Amp Relay which includes the Harness
10' of red and black wire
Alcohol/water injection install Instructions with stickers.